Flexolite oil filter adaptors are available for a wide range of classic cars. They enable vehicles with older oil filter systems to utilise modern spin-off oil filters. All Flexolite oil filter adaptors are easy to fit and make changing the oil filter a clean and simple operation. The adaptors do not affect oil pressure switches, warning lights, or pressure-relief valves. In many case they will provide improved start-up oil pressure due to the use of anti-drain valves in many modern spin-off oil filters. And all cars will benefit from the improved filtration capability of modern filters. Fitting a Flexolite oil filter adaptor also makes it easy to fit an oil cooling system to your classic – vital for competition cars as well as older cars needing to keep pace with modern motoring conditions. Controlling the temperature of your engine oil should add to the life of your engine. All Flexolite oil filter adaptors use standard spin-off filters - a wide range of options are provided on this site with a large application database. Adaptor kits come complete with fitting instructions, any gaskets or seals required, and one filter. Please search by keyword or vehicle make below, or open the Help and Instructions section to see the entire Flexolite range at a glance. Many British cars of the 1950s and ‘60s shared engines, so if your particular model is not listed please look at other marques which used the same engine. Note that vehicles that have by-pass filters can use a conversion kit with a remote filter head that takes a modern spin-on filter - please contact us for advice. FINALLY- please check the inner and outer ring adaptor plate dimensions in the selected product description against your filter head - as this is the best indication (other than matching Fram or Tecalemit filter head numbers) that the kit is right for you.