Oil Cooler and Filter Relocation Systems

Complete systems for over 50 classic cars – some will require fitting of an Oil Filter Adaptor Kit to enable installation and this is indicated in the product description where applicable. Kits feature take off plates, Setrab coolers, rubber lined P clips, adaptors fittings, appropriate PUSH ON hose fittings and the required length of Rapide hose. Hose bore is ½” as standard, increased to 5/8” for large capacity engines and where oil flow is known to be restricted. Similarly most systems feature a 10 row full width cooler, upgraded to 13 row where required. Many systems feature a thermostatic take off plate as standard, though non-thermostatic plate systems can be provided at lower cost - for racing, summer use only and warm climates. If your vehicle isn’t listed, please ask for advice on configuring a system.

Oil Cooler System Fitting Guidance
Files

Product Image

100E-6521 - Valve cover gasket for 100E

From £5.13 (£6.16 inc. VAT @ 20%)

Paper valve cover gasket

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

AP-6520-F - Aquaplane valve chest cover - Ford 8 & 10 hp and 100E

From £249.73 (£299.68 inc. VAT @ 20%)

Aquaplane full oil flow alloy valve chest cover , supplied with fittings and screws (without pipe).

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

AP-6900 - Aquaplane engine oil cooler - Ford 8 & 10 hp and 100E

From £379.84 (£455.81 inc. VAT @ 20%)

Cast aluminium oil cooler (as original Aquaplane pattern). 285mm wide, 230mm tall, 45mm deep, female 1/4 BSP inlet/outlet thread, mounting bracket 60mm tall with 85mm long base and 8mm bolt hole....

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

EOP1 - 12V Oil Cooling Diaphragm Pump

From £204.75 (£245.70 inc. VAT @ 20%)

A diaphragm pump with integral cooling fan and 12 volt motor. Weight 1.5kg. Ports are 3/8" NPTF and may be rotated in 90° increments to simplify plumbing. The pump body is made of lightweight...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCENQ - Generic Oil Cooler System

From £0.01 (£0.01 inc. VAT @ 20%)

If you need help configuring an oil cooling system for your vehicle from our range of parts then please contact us for assistance. A basic cooling system will include: A thermostatic sandwich...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF1 - Oil Cooler System for Ford RS2000 - with spin off oil filter

From £307.09 (£368.51 inc. VAT @ 20%)

Oil cooler system for Ford RS2000. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose with four 90 deg 'push'...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF11 - Oil Cooler System for Ford Escort 1300 and 1600 OHV Post 1971- with spin off oil filter

From £265.74 (£318.89 inc. VAT @ 20%)

Oil cooler system for Ford Escort 1300 and 1600 OHV Post 1971. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings, 1/2"...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF2 - Oil Cooler System for Ford V4 and V6 Cologne engine - with spin off oil filter

From £324.81 (£389.77 inc. VAT @ 20%)

Oil cooler system for Ford V4 and V6 Cologne engines. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose with...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF3 - Oil Cooler System for Ford V4 and V6 Essex engine with PAS - with spin off oil filter

From £307.09 (£368.51 inc. VAT @ 20%)

Oil cooler system for Ford V4 and V6 Essex engines with PAS. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF4 - Oil Cooler System for Ford V4 and V6 Essex engine without PAS - with spin-on oil filter

From £289.37 (£347.24 inc. VAT @ 20%)

Oil cooler system for Ford V4 and V6 Essex engines without PAS. The system includes high-quality Setrab 13 row full-width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8"...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF5 - Oil Cooler System for Ford Sierra Cosworth - with spin off oil filter

From £312.98 (£375.58 inc. VAT @ 20%)

Oil cooler system for Ford Sierra Cosworth. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose with four 90...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF6 - Oil Cooler System for Ford Escort XR3i - with spin off oil filter

From £271.66 (£325.99 inc. VAT @ 20%)

Oil cooler system for Ford XR3i. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings, 1/2" Rapide hose with two 90 deg 'push'...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF7 - Oil Cooler System for pre 1971 Ford Anglia, Escort and Cortina - pre 1970 engines for use with original oil filtration assembly

From £295.28 (£354.34 inc. VAT @ 20%)

Oil cooler system for pre 1970 Ford Anglia, Escort and Cortina models. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings,...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF8 - Oil Cooler System for pre 1971 Ford Anglia, Escort and Cortina - for use with a spin off Oil Filter Adaptor Kit

From £283.46 (£340.15 inc. VAT @ 20%)

Oil cooler system for pre 1971 Ford Anglia, Escort and Cortina models. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number FA083 to enable...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCF9 - Oil Cooler System for Ford Capri 2.8 Litre - with spin off oil filter

From £312.98 (£375.58 inc. VAT @ 20%)

Oil cooler system for Ford Capri 2.8 Litre. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose with four 90...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCH1 - Oil Cooler System for Healey 100-6 and 3000 - for use with original oil filtration assembly

From £307.09 (£368.51 inc. VAT @ 20%)

Oil cooler system for Healey 100-6 and 3000. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose with four...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCH2 - Oil Cooler System for Healey Sprite and MG Midget pre 1974 - with hose connection into filter head

From £186.02 (£223.22 inc. VAT @ 20%)

Oil cooler system for Healey Sprite and MG Midget pre 1974. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings, 1/2" Rapide...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCJ1 - Oil cooler system for Jaguar E-type 4.2 S1

From £342.66 (£411.19 inc. VAT @ 20%)

Oil cooler system for Jaguar E-type 4.2 S1. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number FA038 to enable fitting of this oil cooler...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCJ2 - Oil cooler system for Jaguar E-type 4.2 S2

From £342.66 (£411.19 inc. VAT @ 20%)

Oil cooler system for Jaguar E-type 4.2 S2. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number FA039 to enable fitting of this oil cooler...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCJ3 - Oil cooler system for Jaguar MkII

From £329.48 (£395.38 inc. VAT @ 20%)

Oil cooler system for Jaguar MKII. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number FA035 (early) or FA036 (late) - see FA kit...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCJ4 - Oil cooler system for Jaguar XK150

From £342.66 (£411.19 inc. VAT @ 20%)

Oil cooler system for Jaguar XK150. Unless your car is already fitted with an oil filter adoptor kit you will need to order Flexolite kit number FA034 to enable fitting of this oil cooler system....

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCJ5 - Oil cooler system for Jaguar E-Type 3.8

From £342.66 (£411.19 inc. VAT @ 20%)

Oil cooler system for Jaguar E-type 3.8. Unless your car is already fitted with an oil filter adoptor kit you will need to order Flexolite kit number FA037 to enable fitting of this oil cooler...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCJ6 - Oil cooler system for Jaguar XK120/140

From £342.66 (£411.19 inc. VAT @ 20%)

Oil cooler system for JaguaXK120/140. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number FA077, FA078 or FA079 depending on engine number...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCL1 - Oil Cooler System for all Lotus models pre 1971 - pre 1970 Ford Engines

From £289.37 (£347.24 inc. VAT @ 20%)

Oil cooler system for Lotus models pre 1970. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings, 1/2" Rapide hose with two 90...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCL2 - Oil Cooler System for Lotus Eclat, Elan to 1975, Europa and Excel - post '71 with spin off oil filter

From £277.57 (£333.08 inc. VAT @ 20%)

Oil cooler system for Lotus Eclat, Elan to 1975, Europa and Excel. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 1/2" BSP male male adaptor fittings, 1/2"...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCL3 - Oil Cooler System for Lotus 7 post 1971 Ford Anglia 1172cc

From £171.25 (£205.50 inc. VAT @ 20%)

Oil cooler system for Lotus 7 Post 1971 with Ford Anglia 1172cc E93 Engine. Requires fitting of part number AP-6520-F Aquaplane valve chest cover that provides oil take off connections. System...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCL4 - Oil Cooler System for Lotus Esprit - with spin off oil filter

From £289.37 (£347.24 inc. VAT @ 20%)

Oil cooler system for Lotus Esprit. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose with two 90 deg 'push'...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCMG1 - Oil Cooler System MG Late TC and Early TD - hoses, adaptors and cooler

From £171.25 (£205.50 inc. VAT @ 20%)

Oil cooler system for MG Late TC and Early TD. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2" male male adaptor fittings, 1/2" Rapide hose with two 90...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image
Photograph for illustrative purposes only - not actual product shown

OCMG2 - Oil Cooler System for MG Late TD/TF - for use with original oil filtration arrangement

From £248.04 (£297.65 inc. VAT @ 20%)

Oil cooler system for MG Late TD and TF - allows connection of oil cooler system in conjunction with original filter bowl arrangement. Plate is 1.5" thick and fits between filter head and bowl....

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCMG3 - Oil Cooler System for MG Late TD/TF - for use with a spin off Oil Filter Adaptor Kit

From £271.66 (£325.99 inc. VAT @ 20%)

Oil cooler system for late MG TD and TF. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number FA050 to enable fitting of this oil cooler...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCMG4 - Oil Cooler System for MG Midget 1500 - with spin off filter

From £283.46 (£340.15 inc. VAT @ 20%)

Oil cooler system for MG Midget 1500. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings, 1/2" Rapide hose with four 90 deg...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCMOG1 - Oil Cooler System for Morgan Plus 8 Pre and SD1 Engine - with spin off oil filter

From £307.09 (£368.51 inc. VAT @ 20%)

Oil cooler system for Morgan Plus 8 pre and SD1 engine. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCMOG2 - Oil Cooler System for Morgan 4/4 1600 1968 to 1993 - with spin off oil filter

From £271.66 (£325.99 inc. VAT @ 20%)

Oil cooler system for Morgan 4/4 1600 from 1968 to 1993. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2" male male adaptor fittings, 1/2" Rapide hose...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCR1 - Oil Cooler System for Reliant Scimitar 3 Ltr Essex Engine 1968 to 1975 - with spin off oil filter

From £289.37 (£347.24 inc. VAT @ 20%)

Oil cooler system for Reliant Scimitar 3 Ltr Essex Engine. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 10JIC male male adaptor fittings, 5/8" Rapide hose...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCS1 - Oil Cooler System for Saab 99 2 Ltr - with spin off oil filter

From £265.74 (£318.89 inc. VAT @ 20%)

Oil cooler system for Saab 99 2 litre. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings, 1/2" Rapide hose with two 90 deg...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT1 - Oil Cooler System for Triumph Herald and Spitfire - with spin off oil filter

From £265.74 (£318.89 inc. VAT @ 20%)

Oil cooler system for Triumph Herald and Spitfire. System includes high quality Setrab 10 row full width cooler complete with M22x1.5 to 1/2"BSP male male adaptor fittings, 1/2" Rapide hose with...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT10 - Oil Cooler System for Triumph TR7 to 1982, Stag to 1977 and Dolomite Sprint to 1981 - for use with a spin off Oil Filter Adaptor Kit

From £307.09 (£368.51 inc. VAT @ 20%)

Oil cooler system for Triumph TR7 to 1982, Stag to 1977 and Dolomite Sprint to 1981. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT11 - Oil cooler system for Triumph 2000 and 2.5 PI- 90 deg fitting with conversion to spin off filter

From £318.90 (£382.68 inc. VAT @ 20%)

Oil cooler system for Triumph 2000 and 2.5 PI - Allows connection of an oil cooler system where space is constrained and also adapts to spin off oil filter use. The adaptor provides oil take off...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT2 - Oil Cooler System for Triumph Vitesse and GT6 RHD - in line fitting with original oil filtration assembly

From £248.04 (£297.65 inc. VAT @ 20%)

Oil cooler system for Vitesse and GT6 RHD - Allows connection of oil cooler system in conjunction with original filter bowl arrangement. Plate is 1.5" thick and fits between filter head and bowl....

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT3 - Oil Cooler System for Triumph Vitesse and GT6 RHD - 90 deg fitting with conversion to spin off filter

From £307.09 (£368.51 inc. VAT @ 20%)

Oil cooler system for Vitesse and GT6 RHD - Allows connection of an oil cooler system where space is constrained and also adapts to spin off oil filter use. The adaptor provides oil take off ports...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT4 - Oil Cooler System for Triumph TR2/3/4a - in line fitting with original oil filtration assembly

From £271.66 (£325.99 inc. VAT @ 20%)

Oil cooler system for TR2/3/4a - allows connection of oil cooler system in conjunction with original filter bowl arrangement. Plate is 1.5" thick and fits between filter head and bowl. System...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT5 - Oil Cooler System for Triumph TR2/3/4a - for use with a spin off Oil Filter Adaptor Kit

From £271.66 (£325.99 inc. VAT @ 20%)

Oil cooler system for Triumph TR2/3/4a. Unless your car is already fitted with an oil filter adaptor kit you will need to order Flexolite kit number FA066 to enable fitting of this oil cooler...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT6 - Oil cooler system for Triumph TR5 and 6 - in line fitting with original oil filtration assembly

From £253.93 (£304.72 inc. VAT @ 20%)

Oil cooler system for TR5 and TR6 - Allows connection of oil cooler system in conjunction with original filter bowl arrangement. Plate is 1.5" thick and fits between filter head and bowl. System...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT7 - Oil Cooler System for Triumph TR5 and TR6 - 90 deg fitting with conversion to spin off filter

From £324.81 (£389.77 inc. VAT @ 20%)

Oil cooler system for TR5 and TR6 - Allows connection of an oil cooler system where space is constrained and also adapts to spin off oil filter use. The adaptor provides oil take off ports for...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCT8 - Oil Cooler System for Triumph GT6 LHD - 90 deg fitting with conversion to spin off filter

From £324.81 (£389.77 inc. VAT @ 20%)

Oil cooler system for GT6 LHD - Allows connection of an oil cooler system where space is constrained and also adapts to spin off oil filter use. The adaptor provides oil take off ports for cooling...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image
Photograph for illustrative purposes only - not actual product shown

OCT9 - Oil Cooler System for Triumph TR7 and Dolomite - take off plate replacing cover plate on engine

From £295.28 (£354.34 inc. VAT @ 20%)

Oil cooler system for Triumph TR7 and Dolomite - special take off plate allows connection of an oil cooler system. The plate is fitted with 1/2" BSP male male adaptors. System includes high...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image
Photograph for illustrative purposes only - not actual product shown

OCV1A - Oil cooler system for Vauxhall Chevette, Viva, Firenza OHV - vehicles fitted with original oil filtration system

From £218.50 (£262.20 inc. VAT @ 20%)

Oil cooler system for Vauxhall Chevette, Viva, Firenza OHV maintaining original oil filter element arrangement. System includes high quality Setrab 10 row full width cooler complete with M22x 1.5...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCV1B - Oil cooler system for Vauxhall Chevette, Viva, Firenza OHV - for use with a spin off Oil Filter Adaptor Kit

From £253.93 (£304.72 inc. VAT @ 20%)

Oil cooler system for Vauxhall Chevette, Viva, Firenza OHV. Unless your car is already fitted with an oil filter adaptor kit, you will need to order Flexolite kit number FA070 to enable fitting of...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image

OCV2 - Oil cooler system for Vauxhall Chevette, Viva, Firenza, Magnum OHC (T) - with spin off oil filter

From £265.74 (£318.89 inc. VAT @ 20%)

Oil cooler system for Vauxhall Chevette, Viva, Firenza, Magnum OHC. System includes high quality Setrab 13 row full width cooler complete with M22x 1.5 to 1/2"BSP male male adaptor fittings, 1/2"...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image
Photograph for illustrative purposes only - not actual product shown

OFRD1 - Oil filter relocation system for Daimler Dart

From £330.20 (£396.24 inc. VAT @ 20%)

Oil filter relocation system for the Daimler Dart SP250. Unless your car is already fitted with an oil filter adaptor kit you will also need to order Flexolite kit number FA025 (screw into filter...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems
Product Image
Photograph for illustrative purposes only - not actual product shown

OFRENQ - Generic Filter Relocation System

From £1.24 (£1.49 inc. VAT @ 20%)

Filters may be relocated where: the orginal filter installation is very constrained making maintenance difficult, space is too tight to fit a new oil filter adptor kit, where cooling is required...

Flexolite - Oil Cooling and Filter Relocation - Oil Cooler and Filter Relocation Systems