Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Rectangular chrome on brass rear view mirror with cast, chrome on bronze triangular mounting bracket, popular on some early MG models. CONVEX glass, Rear of mirror head case stamped Desmo...
Polished stainless steel oval mirror head fitted with FLAT glass. Head size 144mm x 70mm with single stud mounting to fit directly into an arm - not supplied. Stud shaft diameter 6.3mm, with two...
Polished stainless steel flat glass interior mirror with chrome finish swan neck arm. Mirror head measures 118mm x 54mm, mounting arm is 80mm tall with mounting bracket 50mm x 20mm, holes centres...
Satin finish stainless steel FLAT glass interior mirror with a chrome offset arm, as originally used on the VW T2. Mirror head measures 155mm x 60mm, mounting arm is 85mm tall with mounting...
Polished stainless steel FLAT glass interior mirror with a chrome offset arm, originally early VW applications. Mirror head measures 155mm x 60mm, mounting arm is 175mm tall with a 'shield' shaped...
Polished stainless steel suction interior rear view mirror. Mirror head size 128mm x 56mm, with stainless steel backing and edge rim. 62mm diameter suction pad held by traditional mirror clamp...
Polished stainless steel interior rear view mirror. Mirror head 128mm x 56mm with stainless steel backing and edge rim. Mounting arm 44mm long with a 58mm x 16mm mounting pad, hole centres at...
Polished stainless steel backed interior mirror which clamps to a rod of maximum 5mm diameter (not supplied). 153mm x 56mm mirror head with FLAT glass.
Dash mounted Wingard 694 head pattern mirror, 2 screw base fitting 25mm x 53mm, holes 31mm centres. All chrome, metal backed FLAT glass mirror 5 7/8" x 2 3/8" (148mm x 60mm), 110mm overall height.
Dash mounted interior mirror with single bolt fixing and CONVEX mirror glass. Mirror head 110mm x 65mm. Chromium plated finish, 120mm overall mirror height. Early 'Desmo' pattern, stamped Desmo on...
Single stud mounted FLAT glass rear view mirror. Large mirror head 160mm x 82mm. Flat glass with chrome surround and back. Overall height 120mm. The actual arm is 75mm tall - to the mirror bolt -...
Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm.
Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm.
Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm.
Dash mirror on adjustable height stem, as fitted to the Jaguar XK140. Fixed, rectangular two screw base size 51mm x 21mm with mounting holes at 31mm centres, angled away from the screen. Metal...
Dash mirror on adjustable height stem, two screw, rounded swivel type base of size 58mm x 25mm. Slotted holes in base with centres between approximately 37mm and 43mm apart. Metal backed FLAT...
Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
Polished stainless steel backed interior mirror which clamps to a rod of maximum 5mm diameter (not supplied). Mirror head 155mm x 61mm with FLAT glass. Chrome on brass clamp assembly with pressed...
Black surround to mirror, chrome stem. Mirror is 120 x 55 mm and 85 mm overall height. Hole spacing is approx 39mm
Black plastic interior mirror, head size 125mm x 55mm. With chrome on brass clamp for clamping to a rod of maximum 5mm diameter - not supplied. 36mm from rod mounting hole to centre of ball...
Lightweight mirror. Black plastic surround to mirror, black plastic stem with self-adhesive attachment onto glass. Mirror is 120 x 55 mm and 85 mm overall height. Centre of mounting ball to pad...
Self adhesive interior mirror, with large 155mm x 60mm size mirror head. Stainless steel mirror edge and back. Black plastic stem with self adhesive pad.
Reproduction interior rear view mirror equivalent to the pre-War Lucas 309L type. CONVEX mirror glass. Mirror head 4” by 1 ¾” (100mm x 43mm). Two screw hole base mount as shown,...
A vintage interior rear view mirror that clamps to the top rail of an opening windscreen, to be held in place by screw clamps. Once the mirror has been clamped in place, it is possible to adjust...
Face mounting larger type vintage interior mirror. FLAT glass 125mm x 66mm which has an attractive bevelled edge. The shaped/embossed mounting bracket (92mm wide) attaches to a bracket, which...
Face/top rail mounting larger type vintage interior mirror with upper lip on bracket. FLAT glass 125mm x 65mm, with an attractive bevel edge and shaped ends. The mounting bracket is triangular...
A nice, neat FLAT glass vintage interior mirror with shaped glass with a bevel edge. Glass size 126mm x 65mm. The glass is held at the top and bottom with a traditional stainless steel clamp which...
Rectangular suction mirror, FLAT glass, with swivel adjustment. Black plastic back and surround 120mm x 56mm. Suction pad 53mm diameter.
Large rectangular suction mirror, FLAT glass, with swivel adjustment. Black plastic back and surround 156mm x 68mm. Suction pad 53mm diameter.
Interior rear view mirror with stainless steel head and chrome stem as fitted to MGA etc. FLAT glass, head size approx 130mm x 57mm, with stainless steel outer edge protection. Mounting stem base...
Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected....
Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected....
Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected....
Interior FLAT glass mirror on stalk. Stainless steel rim and backing with chrome plated mounting. Large head size 154mm x 62mm, overall height approx 95mm. Base 58mm x 16.5mm with 38mm mounting...
Interior rear view mirror with polished stainless steel back and adjustable vball mount in the back of the mirror case. CONVEX glass. Mirror head 127mm x 54mm. Mounting arm approximately 85mm...
Interior rear view mirror with polished stainless steel back with adjusting ball socket. FLAT glass. Large 172mm x 62mm mirror head. Mounting arm approx 85mm high. Approx 105mm overall mirror...
Reproduction interior rear view mirror equivalent to the Lucas 308 type. Large CONVEX mirror glass - mirror head 140mm x 43mm. Elegant two screw hole base mount as shown with 40mm hole centres....
Suction mirror for interior use. Fitted to windscreen with suction cup. FLAT glass, stainless steel back and edge rim. Head size 156mm x 63mm.
Highly polished stainless steel finish, 2 1/2" X 6" mirror head, with chrome plated mirror arm. Perfect replica interior mirror for early Cobras and other classic applications.
Polished stainless steel backed interior mirror which clamps to windscreen surround with a substantial chrome on brass swan neck bracket with stepped attachment fitting, original application early...
Oval vintage mirror with polished stainless steel bracket assembly which will screw to the top rail in the vehicle. Base approx 92mm wide. FLAT mirror glass with an oval rim and back, approx 145mm...
Original new/old stock Wingard 693A interior mirror, oblong FLAT glass (105mm x 42mm) mounted in a black crackle finish frame, stem length to the ball centre 70mm, with 31mm fixing hole centres.
Original new/old stock Wingard 702A interior mirror, oblong FLAT glass (150mm x 60mm) mounted in a black crackle finish frame, stem length to the ball centre 70mm, with 31mm fixing hole centres.