Caps, Terminals and Cable

Spark plug caps, ignition connection accessories and HT ignition lead - including lead similar to original rubber covered cable but covered with a soft matt plastic that withstands oil/heat etc. better than the bright plastic type. Flexolite also offer cotton braided cable in a range of colors plus high performance multi-strand copper core with 'bumblebee' yellow and black hypalon insulation.

Product Image

292SUP - Inline 5000 OHM suppressor for 7mm HT leads

From £4.49 (£5.39 inc. VAT @ 20%)

This inline suppressor features a 7.6mm diameter socket at either end with a brass screw thread in the centre that screws into the core of standard 7mm diameter HT leads. The carbon suppressor...

Product Image

VD05E - 120 degree angled suppressed spark plug cap - Equivalent to NGK part VD05E

From £6.75 (£8.10 inc. VAT @ 20%)

Angled (120 degree) spark plug HT cap, black phenolic moulding with carbon 5k ohm suppressor. Supplied with grommets making it waterproof, or can be used without grommets to better suit older...

Product Image

HTC - HTC unsuppressed spark plug cap - Early Champion type

From £5.67 (£6.80 inc. VAT @ 20%)

HTC straight spark plug terminal, as original early Champion version. These are a non-suppressed terminal with fixed screw tip that screws into the centre core of the HT wire ends. Applications...

Product Image

0.292.UN - Straight unsuppressed spark plug cap

From £3.21 (£3.85 inc. VAT @ 20%)

Straight, non-suppressed, Hypalon spark plug cap, black, complete with terminal.

Product Image

0.595.UN - Right angled unsuppressed spark plug cap

From £4.14 (£4.97 inc. VAT @ 20%)

Right angled, not suppressed, Hypalon spark plug cap complete with terminal

Product Image

0.292.00 - Straight suppressed spark plug cap

From £3.75 (£4.50 inc. VAT @ 20%)

Straight spark plug HT cap, black phenolic moulding with 5K OHM carbon suppressor, overall length 70mm.  Will suit older vehicles. Threaded spur screws into the core of the HT/ignition cable....

Product Image

LB05E - 90 degree (right) angled suppressed spark plug cap - Equivalent to NGK part LB05E

From £6.75 (£8.10 inc. VAT @ 20%)

Angled (90 degree) spark plug HT cap, high quality black phenolic moulding with carbon 5k ohm suppressor. Supplied with grommets making it waterproof, or can be used without grommets to better...

Comparable to other manufacturer part numbers - 0.595.00

Product Image

WCX600 - WCX600 suppressed spark plug cap

From £7.75 (£9.30 inc. VAT @ 20%)

WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.

Product Image

WCX600-CHAMP - WCX600 suppressed spark plug cap - Champion type

From £7.75 (£9.30 inc. VAT @ 20%)

WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.

Product Image

009-11COV - Straight insulator cover for distributor cap or coil terminal

From £2.06 (£2.47 inc. VAT @ 20%)

Insulator cover for distributor cap or coil terminal - use with part numbers 006-03 or 921 depending on whether push in or acorn connection

Product Image

006-13COV - Right angled insulator cover for distributor cap terminal 006-13

From £2.76 (£3.31 inc. VAT @ 20%)

Insulator cover for distributor cap terminal part number 006-13

Product Image

921 - Ignition lead end split brass washer

From £0.44 (£0.53 inc. VAT @ 20%)

Spilt brass washer for distributor HT lead (each). 9.5mm diameter with 2mm hole.

Product Image

006-03 - HT distributor lead push in terminal

From £1.25 (£1.50 inc. VAT @ 20%)

Push fit distributor HT lead terminal, screws into the end of the HT lead, only suitable for copper core HT lead.

Product Image

006-10 - HT lead spark plug terminal

From £0.49 (£0.59 inc. VAT @ 20%)

Crimp type straight spark plug terminal, pushes directly onto the spark plug, can be used with either 7mm copper core or carbon HT lead., overall dimensions25mm long x 8mm o/d.

Product Image

006-13 - Distributor cap terminal

From £0.70 (£0.84 inc. VAT @ 20%)

Distributor cap angled terminal. Crimps onto the end of the HT cable and pushes into the top of the distributor cap. Push in type caps only.

Product Image

416 - HT ignition cable - Black with copper core.

From £3.07 (£3.68 inc. VAT @ 20%)

HT lead that looks very similar to the original rubber covered lead, but it is covered with a soft matt plastic which will withstand oil/heat etc. better than the bright plastic type. Copper wire...

Product Image

416 - HT ignition cable - Black with copper core. - Cut metre

From £3.07 (£3.68 inc. VAT @ 20%)

HT lead that looks very similar to the original rubber covered lead, but it is covered with a soft matt plastic which will withstand oil/heat etc. better than the bright plastic type. Copper wire...

Product Image

416-30 - HT ignition cable - Black with copper core. - 30 metre roll

From £76.92 (£92.30 inc. VAT @ 20%)

HT lead that looks very similar to the original rubber covered lead, but it is covered with a soft matt plastic which will withstand oil/heat etc. better than the bright plastic type. Copper wire...

Product Image

611-HP - HT ignition cable - Bumble-Bee yellow and black hypalon

From £5.67 (£6.80 inc. VAT @ 20%)

High performance multi-strand copper core with yellow and black hypalon insulation. 7mm diameter. 28/0.03 strand, 2mm2 copper. Sold by the metre

Comparable to other manufacturer part numbers - Bumble bee

Product Image

611 - HT ignition cable - Cotton Braided with copper core

From £0.00 (£0.00 inc. VAT @ 20%)

Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...

Product Image

611-blk - HT ignition cable - Cotton Braided with copper core - black

From £6.05 (£7.26 inc. VAT @ 20%)

Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...

Product Image

611-yb - HT ignition cable - Cotton Braided with copper core - yellow with black trace

From £6.05 (£7.26 inc. VAT @ 20%)

Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...

Product Image

611-yr - HT ignition cable - Cotton Braided with copper core - yellow with red trace

From £6.05 (£7.26 inc. VAT @ 20%)

Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...

Product Image

611-yg - HT ignition cable - Cotton Braided with copper core - yellow with green trace

From £6.05 (£7.26 inc. VAT @ 20%)

Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...

Product Image

611-rb - HT ignition cable - Cotton Braided with copper core - red with black trace

From £6.05 (£7.26 inc. VAT @ 20%)

Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...

Product Image

611-ry - HT ignition cable - Cotton Braided with copper core - red with yellow trace

From £6.05 (£7.26 inc. VAT @ 20%)

Cotton braided HT lead with copper wire centre, red with yellow trace, red with black trace, yellow with black trace, yellow with green trace, yellow with red trace or plain black, 6.70mm...