Hose Tail Fittings for Fuel

A large selection of threaded/push on hose tail connections for 1/4, 5/16 and 3/8" pipe. Including straight, 90 degree, equal and unequal Tee, Y pieces and equal and step up hose joiners.

Product Image
Photograph for illustrative purposes only - not actual product shown
Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8BSPT-3/8C-90 - 3/8" BSPT Male 90° For 3/8" ID Hose

From £7.95 (£9.54 inc. VAT @ 20%)

90° male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburetor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HRC8/08 - 1/2" x 1/2" Hose tail inline connector

From £3.97 (£4.76 inc. VAT @ 20%)

1/2" x 1/2" inline hose connector - Brass material

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HRC4/04 - 1/4" x 1/4" Hose tail inline connector

From £2.19 (£2.63 inc. VAT @ 20%)

1/4" x 1/4" inline hose connector  - Brass material

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HRC5/05 - 5/16" x 5/16" Hose tail inline connector

From £2.81 (£3.37 inc. VAT @ 20%)

5/16" x 5/16" inline hose connector - Brass material

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HRC6/06 - 3/8" x 3/8" Hose tail inline connector

From £3.60 (£4.32 inc. VAT @ 20%)

3/8" x 3/8" inline hose connector - Brass material

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image
Photograph for illustrative purposes only - not actual product shown

HJ1/2 - 1/2" ID Hose Joiner

From £3.96 (£4.75 inc. VAT @ 20%)

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image
Photograph for illustrative purposes only - not actual product shown

HJ3/8-5/16 - 3/8-5/16" ID Hose Joiner

From £3.43 (£4.12 inc. VAT @ 20%)

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image
Photograph for illustrative purposes only - not actual product shown
Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4NPTFM-9/16C-STR - 1/4NPTF Male Straight For 9/16" ID Hose

From £6.53 (£7.84 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburetor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4NPTFM-1/2C-STR - 1/4NPTF Male Straight For 1/2" ID Hose

From £6.65 (£7.98 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburetor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4BSPT-1/4C-STR - 1/4BSPT Male Straight For 1/4"ID Hose

From £3.48 (£4.18 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4BSPT-7/16C-STR - 1/4BSPT Male Straight For 7/16"ID Hose

From £3.29 (£3.95 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8BSPT-1/2C-STR - 3/8" BSPT Male Straight For 1/2" ID Hose

From £4.21 (£5.05 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8BSPT-3/8C-STR - 3/8" BSPT Male Straight For 3/8" ID Hose

From £3.77 (£4.52 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/2UNFM-5/16C-STR - 1/2UNF Male For 5/16" ID Hose

From £9.18 (£11.02 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4BSPF-5/16C-STR - 1/4" BSP Female Straight For 5/16" ID Hose

From £4.14 (£4.97 inc. VAT @ 20%)

Straight female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4BSPF-5/16C-90 - 1/4" BSP Female For 5/16" ID Hose

From £24.86 (£29.83 inc. VAT @ 20%)

90 degree female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4BSPM-3/8C-STR - 1/4" BSP Male Straight For 3/8" ID Hose

From £6.28 (£7.54 inc. VAT @ 20%)

Straight 1/4" male to 3/8" hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4BSPM-5/16C-STR - 1/4" BSP Male For 5/16" ID Hose

From £4.53 (£5.44 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4NPTFM-1/4C-STR - 1/4NPTF Male Straight For 1/4"ID Hose

From £10.76 (£12.91 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4NPTFM-3/8C-90 - 1/4" NPTF Male 90° For 3/8" ID Hose - Brass

From £8.66 (£10.39 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4NPTFM-3/8C-STR - 1/4NPTF Male Straight For 3/8" ID Hose

From £7.05 (£8.46 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4NPTFM-5/16C-90 - 1/4" NPTF Male 90°For 5/16" ID Hose - Brass

From £9.44 (£11.33 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/4NPTFM-5/16C-STR - 1/4NPTF Male Straight For 5/16" ID Hose

From £4.59 (£5.51 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/8NPTFM-1/4C-90 - 1/8" NTPF Male 90° For 1/4" ID Hose - Brass

From £7.73 (£9.28 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/8NPTFM-1/4C-STR - 1/8NPTF Male Straight For 1/4" ID Hose

From £2.85 (£3.42 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive clamp or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/8NPTFM-3/8C-90 - 1/8" NPTF Male 90° For 3/8" ID Hose - Brass

From £6.22 (£7.46 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/8NPTFM-3/8C-STR - 1/8NPTF Male Straight For 3/8" ID Hose

From £5.58 (£6.70 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/8NPTFM-5/16C-90 - 1/8" NPTF Male 90° For 5/16" ID Hose - Brass

From £8.48 (£10.18 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive clamp or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

1/8NPTFM-5/16C-STR - 1/8NPTF Male Straight For 5/16" ID Hose

From £2.87 (£3.44 inc. VAT @ 20%)

Straight 1/8" NPTF (tapered) male to 5/16" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor...

Comparable to other manufacturer part numbers - FPA903A,

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8BSPF-3/8C-STR - 3/8" BSP Female Straight For 3/8" ID Hose

From £4.69 (£5.63 inc. VAT @ 20%)

Straight female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8BSPM-1/4C-STR - 3/8" BSP Male For 1/4" ID Hose

From £4.92 (£5.90 inc. VAT @ 20%)

Straight 3/8" BSP male to 1/4" hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8BSPM-3/8C-STR - 3/8" BSP Male Straight For 3/8" ID Hose

From £8.90 (£10.68 inc. VAT @ 20%)

3/8" BSP Straight male to 3/8" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8BSPM-5/16C-STR - 3/8BSP Male For 5/16" ID Hose

From £10.05 (£12.06 inc. VAT @ 20%)

Straight 3/8" BSP male to 5/16" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

3/8NPTFM-3/8C-STR - 3/8NPTF Male Straight For 3/8" ID Hose

From £6.51 (£7.81 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

CA826 - Flexible hose fittings

From £5.00 (£6.00 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

CA826A - Flexible hose fittings - 1/4" BSP female nut with barbed hose fitting for 1/4" ID pipe

From £5.00 (£6.00 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

1/4"BSP nut for 1/4" push on pipe

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

CA826B - Flexible hose fittings - 1/4" BSP female nut with barbed hose fitting for 5/16" ID pipe

From £5.81 (£6.97 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

1/4"BSP nut for 5/16" pipe

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

CA826C - Flexible hose fittings - 3/8" BSP female nut with barbed hose fitting for 3/8" ID pipe

From £6.92 (£8.30 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

3/8"BSP nut for 3/8" push on pipe

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HJ1/4 - 1/4" ID Hose Joiner

From £2.19 (£2.63 inc. VAT @ 20%)

Steel Hose Joiner For 1/4" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Comparable to other manufacturer part numbers - HRC4/04,

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HJ1/4-5/16 - 1/4" To 5/16" ID Step Up Hose Joiner

From £3.49 (£4.19 inc. VAT @ 20%)

Steel Step Up Hose Joiner - from 1/4" To 5/16" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HJ3/8 - 3/8" ID Hose Joiner

From £3.60 (£4.32 inc. VAT @ 20%)

Steel Hose Joiner For 3/8" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Comparable to other manufacturer part numbers - HRC6/06,

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HJ5/16 - 5/16" ID Hose Joiner

From £2.81 (£3.37 inc. VAT @ 20%)

Steel Hose Joiner For 5/16" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Comparable to other manufacturer part numbers - HRC5/05,

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

HJ5/16-3/8 - 5/16" To 3/8" ID Step Up Hose Joiner

From £3.86 (£4.63 inc. VAT @ 20%)

Steel Step Up Hose Joiner from 5/16in To 3/8in ID Hose.Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image
Photograph for illustrative purposes only - not actual product shown

M10M-5/16C-STR - M10 x 1 Male for 5/16" ID Hose

From £10.46 (£12.55 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

M12M-1/4C-STR - M12 x 1.5 Male for 1/4" ID Hose

From £2.37 (£2.84 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

M12M-5/16C-STR - M12 x 1 Male for 5/16" ID Hose

From £11.56 (£13.87 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

M14M-5/16C-STR - M14 x 1.5 Male for 5/16" ID Hose

From £11.50 (£13.80 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image
Photograph for illustrative purposes only - not actual product shown

M16M-3/8C-STR - M16 x 1.5 Male for 3/8" ID Hose

From £12.34 (£14.81 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

MHJ1/4T - 1/4" ID Hose Push On Brass 'T' Piece

From £17.30 (£20.76 inc. VAT @ 20%)

T piece with hose tail fittings for 1/4" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

MHJ1/4Y - 1/4" ID Hose Push On Brass Y' Piece

From £9.91 (£11.89 inc. VAT @ 20%)

Y piece with hose tail fittings for 1/4" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

MHJ3/8-5/16UT - 2 x 3/8" and 1 x 5/16" ID Hose Push on Unequal 'T' Piece

From £11.76 (£14.11 inc. VAT @ 20%)

Unequal T piece with hose tail fittings for 3/8 and 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor...

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

MHJ3/8T - 3/8" ID Hose Push On Brass 'T' Piece

From £12.40 (£14.88 inc. VAT @ 20%)

T piece with hose tail fittings for 3/8" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

MHJ3/8Y - 3/8" ID Hose Push On Brass Y' Piece

From £12.40 (£14.88 inc. VAT @ 20%)

Y piece with hose tail fittings for 3/8" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

MHJ5/16T - 5/16" ID Hose Push On Brass 'T' Piece

From £11.55 (£13.86 inc. VAT @ 20%)

T piece with hose tail fittings for 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel
Product Image

MHJ5/16Y - 5/16" ID Hose Push On Brass Y' Piece

From £11.15 (£13.38 inc. VAT @ 20%)

Y piece with hose tail fittings for 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Hose Tail Fittings for Fuel