Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Oil cooler system for Triumph 2000 and 2.5 PI - Allows connection of an oil cooler system where space is constrained and also adapts to spin off oil filter use. The adaptor provides oil take off ports for cooling and turns the filter through 90 deg, enabling use of spin off oil filters for convenience. Take off ports are tapped 1/2" BSP. System includes high quality Setrab 13 row full width cooler complete with 1/2" BSP to 1/2"BSP male male adaptor fittings, 1/2" Rapide hose with two 90 deg 'push' fittings and two straight 'push' fittings, bonded seals and rubber and zinc plated steel 'P' Clips. System EXCLUDES oil cooler mounting brackets - please select from part numbers OCBPair, OCBFW, OCBAL or OCBALBK. If an oilstat is required please select from part numbers ILT2B or ILT3B noting four additional worm drive clips/double eared O clips (for 19mm OD hose), or 'push on' hose fittings 1/2BSPF-1/2P-STR will be required, depending on selection.
