Straight Banjo Compression Fittings for TFE Hose

A range of straight, extended and non extended, single and double compression Banjo fittings - including hose end banjo bolts. For direct fitting into calipers, wheel and brake cylinders. Zinc plated and stainless steel options. Non extended banjo fittings take long banjo bolts. Extended fittings have a slimmer profile and take shorter banjo bolts.
Always be sure to mate appropriate fittings to achieve seal integrity. Please see the Help & Instructions section for part numbering and product description information as well as compression fitting assembly instructions. Please also note that you can search this category by equivalent Goodridge number.

TFE Hose and Assembly
Files


Part numbering and product description

Product descriptions indicate fitting material as well as any specific detail, e.g. fitting length under the hexagon shoulder, whether a swivel or fixed fitting and seat type. PLEASE TAKE CARE to select the correct seat for your application/to mate with your system components – either CONCAVE or CONVEX (or FLAT for gauge seats) – or you will not achieve a hydraulic seal when you assemble fittings. Convex seats must mate with concave seats and vice versa.

Part numbers indicate connection type and special features – e.g.

Male Threaded Compression Fittings for TFE hose

03-3/8-SXLMP is a -3 compression to 3/8 UNF thread – Straight, conveX, Long, Male, Plated steel 03-M10x1-SXBMSS is a -3 compression to M10x1 metric thread – Straight, conveX, Bulkhead, Male, Stainless Steel

Angled Banjo Compression Fittings for TFE hose

04-7/16-BANEX20P is a -4 compression to 7/16 UNF thread – BANjo, EXtended, 20 degree, Plated steel

Banjo Bolts

3/8UNF-SDBBP is a 3/8 UNF threaded Short Double Banjo Bolt Plated steel

Adaptor Fittings

4JICM-1/8BSP-STR is a -4 JIC thread to 1/8 BSP thread STRaight Male Male adaptor

1/8BSP-M10X1.25V-STR is a -1/8 BSP thread to M10x1.25 thread with ConcaVe face STRaight Male Male adaptor

So please search categories using thread or dash size, angle etc.

Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-03-BANP - Twin -3 hose fitting to 3/8" UNF-M10-1/8" BSP BANJO - zinc plated steel

From £28.00 (£33.60 inc. VAT @ 20%)

Zinc plated steel re-usable TWIN TAKE OFF Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5095-03P

Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-03-BANPEX - Extended twin -3 hose fitting to 3/8" UNF-M10-1/8" BSP BANJO - zinc plated steel

From £24.13 (£28.96 inc. VAT @ 20%)

Zinc plated steel re-usable EXTENDED TWIN TAKE OFF Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Comparable to other manufacturer part numbers - 5098-03P

Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-03-BANPEXSS - Extended twin -3 hose fitting to 3/8" UNF-M10-1/8" BSP BANJO - stainless steel

From £29.31 (£35.17 inc. VAT @ 20%)

Stainless steel re-usable EXTENDED TWIN TAKE OFF Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Comparable to other manufacturer part numbers - 5098-03C

Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-03-BANSS90 - Twin -3 hose fitting to 3/8 UNF-M10-1/8BSP 90 deg BANJO - stainless steel

From £46.69 (£56.03 inc. VAT @ 20%)

Stainless steel re-usable TWIN TAKE OFF 90 deg Banjo compression fitting. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5096-03C

Product Image

03-3/8-BANEX20P - -3 hose to 3/8 UNF-M10-1/8BSP extended 20 deg BEND BANJO fitting - zinc plated steel

From £8.83 (£10.60 inc. VAT @ 20%)

Zinc plated carbon steel re-usable EXTENDED NECK Banjo compression fitting - with 20 deg BEND. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Comparable to other manufacturer part numbers - 5093-03P

Product Image

03-3/8-BANEXP - -3 hose to 3/8" UNF-M10-1/8BSP extended BANJO fitting - zinc plated steel

From £6.39 (£7.67 inc. VAT @ 20%)

Zinc plated carbon steel re-usable EXTENDED NECK Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Comparable to other manufacturer part numbers - 5092-03P

Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-BANEXSS - -3 hose to 3/8" UNF-M10-1/8" BSP extended BANJO fitting - stainless steel

From £12.69 (£15.23 inc. VAT @ 20%)

Stainless steel re-usable EXTENDED NECK Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Comparable to other manufacturer part numbers - 5092-03C

Product Image

03-3/8-BANP - -3 hose to 3/8" UNF-M10-1/8" BSP BANJO fitting - zinc plated steel

From £7.33 (£8.80 inc. VAT @ 20%)

Dash3 to 3/8" Zinc plated carbon steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5091-03P

Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-BANSS - -3 hose to 3/8" UNF-M10-1/8BSP BANJO fitting - stainless steel

From £13.57 (£16.28 inc. VAT @ 20%)

Stainless steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5091-03C

Product Image
Photograph for illustrative purposes only - not actual product shown

03-7/16-BANEXP - -3 hose to 7/16" UNF extended BANJO fitting - zinc plated steel

From £19.53 (£23.44 inc. VAT @ 20%)

Zinc plated carbon steel re-usable EXTENDED NECK Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Comparable to other manufacturer part numbers - 5092-03-04P

Product Image
Photograph for illustrative purposes only - not actual product shown

03-7/16-BANP - -3 hose to to 7/16" UNF BANJO fitting - zinc pplated steel

From £12.47 (£14.96 inc. VAT @ 20%)

Dash3 hose to 7/16" Zinc plated carbon steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5091-03-04P

Product Image
Photograph for illustrative purposes only - not actual product shown

03-7/16-BANSS - -3 hose to to 7/16" UNF BANJO fitting - stainless steel

From £11.71 (£14.05 inc. VAT @ 20%)

Stainless steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5091-03-04C

Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1-LBBP - -3 hose to M10 x1 long banjo bolt

From £5.24 (£6.29 inc. VAT @ 20%)

Zinc plated steel -3 hose compression fitting to LONG banjo bolt. - 25mm under Hex

Comparable to other manufacturer part numbers - 492-31LP

Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1-SBBP - -3 hose to M10 x1 short banjo bolt

From £8.48 (£10.18 inc. VAT @ 20%)

Zinc plated steel -3 hose compression fitting to SHORT banjo bolt. 20mm under Hex

Comparable to other manufacturer part numbers - 492-31P

Product Image

03-M12-BANP - -3 hose to M12 BANJO fitting - zinc plated steel

From £11.87 (£14.24 inc. VAT @ 20%)

Dash3 hose to M12 Zinc plated carbon steel re-usable Banjo compression fitting. For direct fitting into callipers, wheels and brake cylinders. Takes LONG banjo bolts.

Product Image

03-OLIVE - Brass olive for -3 compression fittings

From £1.35 (£1.62 inc. VAT @ 20%)

Brass olive for -3 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1205-03B

Product Image

03-SOCKET - Steel socket for -3 compression fittings

From £1.18 (£1.42 inc. VAT @ 20%)

Steel female socket for -3 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1206-03P

Product Image
Photograph for illustrative purposes only - not actual product shown

04-3/8-BANEXP - -4 hose to 3/8" UNF-M10-1/8" BSP extended BANJO fitting - zinc plated steel

From £19.53 (£23.44 inc. VAT @ 20%)

Zinc plated carbon steel re-usable EXTENDED NECK Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Product Image
Photograph for illustrative purposes only - not actual product shown

04-3/8-BANP - -4 hose to 3/8" UNF-M10-1/8" BSP BANJO fitting - zinc plated steel

From £19.53 (£23.44 inc. VAT @ 20%)

Dash4 to 3/8" Zinc plated carbon steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5091-04-03P

Product Image
Photograph for illustrative purposes only - not actual product shown

04-3/8-BANSS - -4 hose to 3/8 UNF"-M10-1/8" BSP BANJO fitting - stainless steel

From £24.29 (£29.15 inc. VAT @ 20%)

Stainless steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Product Image
Photograph for illustrative purposes only - not actual product shown

04-7/16-BANEXP - -4 hose to 7/16" UNF extended BANJO fitting - zinc plated steel

From £14.26 (£17.11 inc. VAT @ 20%)

Zinc plated carbon steel re-usable EXTENDED NECK Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes SHORT banjo bolts.

Product Image
Photograph for illustrative purposes only - not actual product shown

04-7/16-BANP - -4 hose to to 7/16" UNF BANJO fitting - zinc plated steel

From £13.61 (£16.33 inc. VAT @ 20%)

Dash4 hose to 7/16" Zinc plated carbon steel re-usable Banjo compression fitting. For direct fitting into callipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5091-04P

Product Image
Photograph for illustrative purposes only - not actual product shown

04-7/16-BANSS - -4 hose to to 7/16" UNF BANJO fitting - stainless steel

From £29.54 (£35.45 inc. VAT @ 20%)

Stainless steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Product Image
Photograph for illustrative purposes only - not actual product shown

04-M12-BANP - -4 hose to M12 BANJO fitting - zinc plated steel

From £15.42 (£18.50 inc. VAT @ 20%)

Dash4 Zinc plated carbon steel re-usable Banjo compression fitting. For direct fitting into calipers, wheels and brake cylinders. Takes LONG banjo bolts.

Comparable to other manufacturer part numbers - 5091-04-M12

Product Image

04-OLIVE - Brass olive for -4 compression fittings

From £1.80 (£2.16 inc. VAT @ 20%)

Brass olive for -4 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1205-04B

Product Image

04-SOCKET - Steel socket for -4 compression fittings

From £2.71 (£3.25 inc. VAT @ 20%)

Steel female socket for -4 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1206-06P