Male Threaded Compression Fittings for TFE Hose

-3 and -4 TFE hose compression to straight male threaded zinc plated and stainless steel fittings. UNF, Metric and NPTF threaded standard and bulkhead fittings.
PLEASE TAKE CARE to select the correct seat for your application/to mate with your system components – either CONCAVE or CONVEX (or FLAT for gauge seats) – or you will not achieve a hydraulic seal when you assemble fittings. Always be sure to mate appropriate fittings to achieve seal integrity. Please see the Help & Instructions section for part numbering and product description information as well as compression fitting assembly instructions. Please also note that you can search this categories by equivalent Goodridge number.

TFE Hose and Assembly
Files


Part numbering and product description

Product descriptions indicate fitting material as well as any specific detail, e.g. fitting length under the hexagon shoulder, whether a swivel or fixed fitting and seat type. PLEASE TAKE CARE to select the correct seat for your application/to mate with your system components – either CONCAVE or CONVEX (or FLAT for gauge seats) – or you will not achieve a hydraulic seal when you assemble fittings. Convex seats must mate with concave seats and vice versa.

Part numbers indicate connection type and special features – e.g.

Male Threaded Compression Fittings for TFE hose

03-3/8-SXLMP is a -3 compression to 3/8 UNF thread – Straight, conveX, Long, Male, Plated steel 03-M10x1-SXBMSS is a -3 compression to M10x1 metric thread – Straight, conveX, Bulkhead, Male, Stainless Steel

Angled Banjo Compression Fittings for TFE hose

04-7/16-BANEX20P is a -4 compression to 7/16 UNF thread – BANjo, EXtended, 20 degree, Plated steel

Banjo Bolts

3/8UNF-SDBBP is a 3/8 UNF threaded Short Double Banjo Bolt Plated steel

Adaptor Fittings

4JICM-1/8BSP-STR is a -4 JIC thread to 1/8 BSP thread STRaight Male Male adaptor

1/8BSP-M10X1.25V-STR is a -1/8 BSP thread to M10x1.25 thread with ConcaVe face STRaight Male Male adaptor

So please search categories using thread or dash size, angle etc.

Product Image
Photograph for illustrative purposes only - not actual product shown

03-1/8B-SFMP - -3 hose to 1/8" BSP straight male connector - zinc plated steel

From £9.39 (£11.27 inc. VAT @ 20%)

Dash 3 Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection to callipers, master and wheel cylinders.

Comparable to other manufacturer part numbers - 323-03P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-1/8N-SFMP - -3 hose to 1/8" NPTF straight male connector - zinc plated steel

From £10.25 (£12.30 inc. VAT @ 20%)

Dash 3 hose to 1/8" male connector, Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-3/8-SFMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £7.38 (£8.86 inc. VAT @ 20%)

Dash 3 hose to 3/8" UNF. Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on bottom of port - use...

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-SVMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £7.17 (£8.60 inc. VAT @ 20%)

Dash 3 hose to 3/8" UNF Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. CONCAVE seat on bottom of port. 0.37"...

Comparable to other manufacturer part numbers - 440-03P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-3/8-SXBMP - -3 hose to 3/8" UNF straight male BULKHEAD connector - zinc plated steel

From £8.17 (£9.80 inc. VAT @ 20%)

Dash3 (–3 JIC) to 3/8" UNF Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. A range of locknuts and...

Comparable to other manufacturer part numbers - 443-03P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-3/8-SXBMSS - -3 hose to 3/8" UNF straight male BULKHEAD connector - stainless steel

From £12.43 (£14.92 inc. VAT @ 20%)

Non swivel stainless steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. A range of locknuts and washers are available for these fittings

Comparable to other manufacturer part numbers - 443-03C

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-3/8-SXLMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £8.21 (£9.85 inc. VAT @ 20%)

Non swivel re-usable compression fitting, for direct connection into brake calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.5" thread length

Comparable to other manufacturer part numbers - 441-03P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-3/8-SXMP - -3 hose to 3/8" UNF straight male connector - zinc plated steel

From £8.21 (£9.85 inc. VAT @ 20%)

Non swivel re-usable compression fitting, for direct connection into brake calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.37" thread length

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1-SFMP - -3 hose to M10 x1 straight male connector - zinc plated steel

From £7.06 (£8.47 inc. VAT @ 20%)

Dash 3 to M10 (x1.0 fine thread) Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on the bottom of port...

Comparable to other manufacturer part numbers - 448-31P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1-SVMP - -3 hose to M10 x1 straight male connector - zinc plated steel

From £8.02 (£9.62 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONCAVE seat on bottom of port. 0.37" thread length.

Comparable to other manufacturer part numbers - 442-31P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1-SVMSS - -3 hose to M10 x1 straight male connector - stainless steel

From £12.81 (£15.37 inc. VAT @ 20%)

Non swivel stainless steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONCAVE seat on bottom of port.

Comparable to other manufacturer part numbers - 442-31C

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-M10x1-SXBMP - -3 hose to M10 x1 straight male BULKHEAD connector - zinc plated steel

From £7.79 (£9.35 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat. A range of locknuts and washers are available for...

Comparable to other manufacturer part numbers - 446-31P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1-SXBMSS - -3 hose to M10 x1 straight male BULKHEAD connector - stainless steel

From £12.52 (£15.02 inc. VAT @ 20%)

Non swivel stainless steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. A range of locknuts and washers are available for these fittings

Comparable to other manufacturer part numbers - 446-31C

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-M10x1-SXLMP - -3 hose to M10 x1 straight male connector - zinc plated steel

From £7.97 (£9.56 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.50" thread length

Comparable to other manufacturer part numbers - 445-32LP

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1.25-SFMP - -3 hose to M10 x1.25 straight male connector - zinc plated steel

From £15.64 (£18.77 inc. VAT @ 20%)

Dash 3 hose to M10 x1.25 male. Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on bottom of port - use...

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-M10x1.25-SVMP - -3 hose to M10 x1.25 straight male connector - zinc plated steel

From £7.28 (£8.74 inc. VAT @ 20%)

Dash 3 (JIC) hose to M10 (x1.25) non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. CONCAVE seat on the bottom of...

Comparable to other manufacturer part numbers - 442-32P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image
Photograph for illustrative purposes only - not actual product shown

03-M10x1.25-SXMP - -3 hose to M10 x1.25 straight male connector - zinc plated steel

From £8.85 (£10.62 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat on bottom of port. 0.37" thread length.

Comparable to other manufacturer part numbers - 445-32P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-OLIVE - Brass olive for -3 compression fittings

From £1.42 (£1.70 inc. VAT @ 20%)

Brass olive for -3 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1205-03B

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

03-SOCKET - Steel socket for -3 compression fittings

From £1.24 (£1.49 inc. VAT @ 20%)

Steel female socket for -3 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1206-03P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

04-7/16-SFMP - -4 hose to 7/16" UNF straight male connector - zinc plated steel

From £14.49 (£17.39 inc. VAT @ 20%)

Dash 4 hose to 7/16" UNF male. Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. FLAT seat on the bottom of port...

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

04-7/16-SXBMP - -4 hose to 7/16" UNF straight male BULKHEAD connector - zinc plated steel

From £14.54 (£17.45 inc. VAT @ 20%)

Dash 4 (–4 JIC) to 7/16" UNF. Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. A range of locknuts and...

Comparable to other manufacturer part numbers - 443-04P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

04-7/16-SXMP - -4 hose to 7/16" UNF straight male connector - zinc plated steel

From £11.99 (£14.39 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. CONVEX seat on bottom of port.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

04-M12x1-SFMP - -4 hose to M12x1 straight male connector - zinc plated steel

From £13.87 (£16.64 inc. VAT @ 20%)

Non swivel zinc plated carbon steel re-usable compression fitting, for direct connection into calipers, master and wheel cylinders. FLAT seat on bottom of port - use copper washer under hexagon.

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

04-M12x1-SXBMP - -4 hose to M12 x1 straight male BULKHEAD connector - zinc plated steel

From £16.66 (£19.99 inc. VAT @ 20%)

Dash4 (–4 JIC) to M12 (x1.0 fine thread) Non-swivel zinc plated carbon steel re-usable compression fitting, for direct connection into callipers, master and wheel cylinders. A range of...

Comparable to other manufacturer part numbers - 446-04-M121

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

04-OLIVE - Brass olive for -4 compression fittings

From £1.89 (£2.27 inc. VAT @ 20%)

Brass olive for -4 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1205-04B

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose
Product Image

04-SOCKET - Steel socket for -4 compression fittings

From £2.85 (£3.42 inc. VAT @ 20%)

Steel female socket for -4 compression brake fittings for TFE hose

Comparable to other manufacturer part numbers - 1206-06P

Flexolite - Fuel, Brake and Clutch Hose and Fittings - Re-Useable Clutch and Brake fittings - Male Threaded Compression Fittings for TFE Hose